Engineering, 01.10.2019 05:30 Itslegit3
Ahollow aluminum sphere, with an electrical heater in the center, is used in tests to determine the thermal conductivity of insulating materials. the inner and outer radii of the sphere are 0.15 and 0.18 m, respectively, and testing is done under steady-state conditions with the inner surface of the aluminum maintained at 250°c. in a particular test, a spherical shell of insulation is cast on the outer surface of the sphere to a thickness of 0.12 m. the system is in a room for which the air temperature is 20°c and the convection coefficient at the outer surface of the insulation is 30 w/m2·k. if 70w are dissipated by the heater under steady-state conditions, what is the thermal conductivity of the insulation?
Answers: 3
![R =\frac{1}{4\pi K_a} [\frac{1}{r_i} - \frac{1}{r_o}] + \frac{1}{4\pi K_{ins}} [\frac{1}{r_0} - \frac{1}{r}] + \frac{1}{4\pi r^2 h}](/tpl/images/0278/9097/1f677.png)
![R =\frac{1}{4\pi \times 230} [\frac{1}{0.15} - \frac{1}{0.18}] + \frac{1}{4\pi K_{ins}} [\frac{1}{.18} - \frac{1}{0.30}] + \frac{1}{4\pi 0.30^2 30}](/tpl/images/0278/9097/ebe59.png)
Other questions on the subject: Engineering
Engineering, 03.07.2019 14:10, cowgyrlup124
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 04.07.2019 18:10, anna22684
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:10, qwertylol12345
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 18:10, Candi9697
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
You know the right answer?
Ahollow aluminum sphere, with an electrical heater in the center, is used in tests to determine the...
Questions in other subjects:
English, 05.12.2021 14:00
History, 05.12.2021 14:00
Health, 05.12.2021 14:00
Chemistry, 05.12.2021 14:00
