Engineering, 01.10.2019 02:10 LuchaPug
On july 23, 1983, air canada flight 143 required 22,300 kg of jet fuel to fly from montreal to edmonton. the density of jet fuel is 0.803 g/ml, or 1.77 lb/l. the plane had 7682 l of fuel on board in montreal. the ground crew there multiplied the 7682 l by the factor 1.77(without units) and concluded that they had 13,597 kg of fuel on board and needed an additional 8703 kg by the factor 1.77(again without units) and concluded they needed to add 4916 l of fuel. they added 5000l. on its flight, the plane ran out of fuel and crash-landed near winnipeg, hundreds of kilometers short of its destination. (there were few injuries and no fatalities.) what mistake did the ground crew make? how much fuel(in l) should they have added before takeoff?
Answers: 2
Other questions on the subject: Engineering
Engineering, 03.07.2019 15:10, theamandawhite
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 18:20, samueltaye
Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?
Answers: 1
Engineering, 04.07.2019 19:10, pjgolden04
How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?
Answers: 2
You know the right answer?
On july 23, 1983, air canada flight 143 required 22,300 kg of jet fuel to fly from montreal to edmon...
Questions in other subjects:
Mathematics, 01.08.2019 20:00
Mathematics, 01.08.2019 20:00
