Engineering, 29.09.2019 01:30 enchantednights

Avapor-compression refrigeration cycle with f-12 as the working fluid has condenser inlet conditions if 200 psi, 230 f and evaporator exit conditions of 20 psi, 10 f. the freon leaves the condenser at 110 f. mass flow rate is 5 lbm/s. a) calculate the actual compressor power (horsepower) b) calculate the actual cooling rate in tons. c) find the temperature at the evaporator inlet. d) calculate compressor efficiency.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, bryneosburn

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

Answers: 2

continue

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

Engineering, 04.07.2019 18:10, niicoleassssssf

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Answers: 2

continue

Engineering, 04.07.2019 18:10, 19deleonl

Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.

Answers: 2

continue

You know the right answer?

Avapor-compression refrigeration cycle with f-12 as the working fluid has condenser inlet conditions...