Liquid water enters a heat exchanger operating at steady state at t1 = 60°f, p1 = 1 atm and exits at t2 = 160°f with a negligible change in pressure. in a separate stream, steam enters at t3 = 20 lbf/in^2, x^3 = 92% and exits at t = 140°f, p4 = 18 ibf/in^2. stray heat transfer and the effects of motion and gravity are negligible. let to = 60°f, po = 1 atm. determine (a) the ratio of the mass flow rates of the two streams and (b) the rate of exergy destruction, in btu per lb. of steam entering the heat exchanger.

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10