Engineering, 27.09.2019 23:30 brunovillarreal6576

An engine shaft running at 120 rp. m. is required to drive a machine shaft by means of a belt. the pulley on the engine shaft is of 2 m diameter and that of the machine shaft is 1 m diameter. if the belt thickness is 5 mm; determine the speed of the machine shaft, when 1. there is no slip; and 2. there is a slip of 3%

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, EmilySerna

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

continue

Engineering, 04.07.2019 16:10, TheOriginalMeyah

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Answers: 2

continue

Engineering, 04.07.2019 18:10, mm016281

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit. explain why the pneumatic piston stumbles when it hits an obstacle.

Answers: 2

continue

Engineering, 04.07.2019 18:10, danksans7011

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

continue

You know the right answer?

An engine shaft running at 120 rp. m. is required to drive a machine shaft by means of a belt. the p...