During drilling of an 8-1/2in hole at 8,000 ft, a complete loss of circulation was observed. drilling was stopped and the mud level in the annulus was observed to fall rapidly. the well was filled with water of 62 pcf density until the annular level remained stationary. if the volume of water used was 65.7 bbl and the mud density is 75 pcf, determine the formation pressure and the new mud weight required to balance the formation pressure. assume the intermediate casing used is 9-5/8 in, 40 # set at 6000 ft. and the drill pipe has grade e with 5in od.

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10