Engineering, 27.09.2019 02:30 CarlsonB

Avertical piston-cylinder device contains nitrogen gas at 2 bar and 0.3 m3 . at this state, a linear spring with a spring constant of 100 kn/m touches the top of the piston but exerts no force on it. the cross-sectional area of the piston is 0.1 m2 . the nitrogen gas is then heated, pushing the piston upwards against the spring, and expands until the volume of the gas doubles show the process on a p-v diagram. b. a determine final pressure (kpa) of the nitrogen gas what is the total work done (kj) during the expansion process? d. what fraction of the total work is done against the spring?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, alyssabailey7545

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

Answers: 1

continue

Engineering, 04.07.2019 18:10, kevin72836

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

continue

Engineering, 04.07.2019 19:10, santosbeti90

With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.

Answers: 1

continue

Engineering, 04.07.2019 19:20, justicehernandez

Acarnot refrigerator operates in a room in which the temperature is 21°c and of power when operating. if the food compartment of the refrigerator is consumes 3 kw to be maintained at 2°c, determine (a) the coefficient of performance of the cycle and (b) the rate of heat removal from the food compartment. refrigerator cycle that has a higher coefficient of performance than that of the discussed (e) is it possible to develop a carn ot refrigerator, operating between the same temperature limits? explain

Answers: 2

continue

You know the right answer?

Avertical piston-cylinder device contains nitrogen gas at 2 bar and 0.3 m3 . at this state, a linear...