Engineering, 24.09.2019 02:10 grumpygreengori

Ahydraulic cylinder has 6 inch diameter and 20 inch stroke using a hydraulic oil with a bulk modulus of 295,000 psi (0% air, and 80 f). find the percent change in the volume of oil if the system operates at 6,000 psi (note, 6,000 psi is a really high, but not rare, pressure for a system). real fluid power system -- the fluid heats in the system and the air entrapment in the fluid reduces the oil bulk modulus to 66,000 psi (1 to 2% air, and 180°f). find the percent change in the volume of oil if the system still operates at 6,000 psi.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, demarcuswiseman

Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.

Answers: 3

continue

Engineering, 04.07.2019 19:10, gabigalvis1091

What is the main objective of using reheat rankine cycle?

Answers: 3

continue

Engineering, 04.07.2019 19:20, horsedoggal1234

Consider airflow over a flat plate of length l = 1.5 m under conditions for which transition occurs at le = 0.9 m based on the critical reynolds number, re, e = 5 x 10. evaluating the thermophysical properties of air at 400 k, determine the air velocity. (hint: use the tables to find the properties of air)

Answers: 3

continue

Engineering, 05.07.2019 10:10, johns2380

What is the correct way to measure the overall length of a boat? measure from the tip of the bow to the highest point on the gunwale. measure from the tip of the bow in a straight line to the stern of the boat. measure from the tip of the bow in a straight line to the back seat. measure from port to starboard at the boat's widest point.

Answers: 1

continue

You know the right answer?

Ahydraulic cylinder has 6 inch diameter and 20 inch stroke using a hydraulic oil with a bulk modulus...