Engineering, 23.09.2019 16:30 AM28
It will be necessary to fill a 300,000 yd3 depression, and the fill material must be compacted to 95% of the standard proctor (maximum) density. a 10% final moisture content is desired in either case. the unit weight of water is 62.4 lbf/ft3. (a). what would be the excavated volume of borrow from site a in place? (b). what would be the volume of borrow from site b in transport? (c). what soil would be cheaper to use? what’s the cost for the cheaper soil? (d). what is unit weight in transport from borrow site b?
Answers: 3
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, lowkeyqueenk
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 18:20, luisgonz5050
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
Engineering, 04.07.2019 18:20, jessie8022
Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.
Answers: 2
You know the right answer?
It will be necessary to fill a 300,000 yd3 depression, and the fill material must be compacted to 95...
Questions in other subjects:
History, 06.10.2019 20:30
History, 06.10.2019 20:30
