Engineering, 21.09.2019 00:30 ShundaBaker

Atruncated solid cone is of circular cross section, and its diameter is related to the axial coordinate by an expression of the form d=ax3/2 , where a= 1.0 m-1/2. the sides are well insulated, while the top surface of the cone at x1 is maintained at t1 and the bottom surface at x2 is maintained at t2 . what is the rate of heat transfer across the cone if it is constructed of pure aluminum with x1= 0.075 m, t1= 135°c, x2= 0.225 m, and t2= 20°c? evaluate the properties of aluminum at t¯= 333 k

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, Tyrant4life

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Answers: 1

continue

Engineering, 04.07.2019 18:20, samantha636

Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k

Answers: 2

continue

Engineering, 04.07.2019 19:10, phantomlizz3233

In general, how do thermosetting plastics compare to thermoplastics in mechanical and physical properties?

Answers: 3

continue

Engineering, 04.07.2019 19:10, nbunny7208

What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces. a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.

Answers: 1

continue

You know the right answer?

Atruncated solid cone is of circular cross section, and its diameter is related to the axial coordin...