subject
Engineering, 19.09.2019 17:10 skyyk8107

Awaste stabilization pond is used to treat a dilute municipal wastewater before the liquid is discharged into a river. the inflow to the pond has a flow rate of q = 4,000 m3/day and a bod1 concentration of cin = 25 mg/l. the volume of the pond is 20,000 m3. the purpose of the pond is to allow time for the decay of bod to occur before discharge into the environment. bod decays in the pond with a first-order rate constant equal to 0.25/day. what is the bod concentration at the outflow of the pond, in units of mg/l?

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 16:10, Arealbot
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
image
Engineering, 04.07.2019 18:10, lerasteidl
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
image
Engineering, 04.07.2019 18:10, colin774
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
image
Engineering, 04.07.2019 18:20, krojas015
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
You know the right answer?
Awaste stabilization pond is used to treat a dilute municipal wastewater before the liquid is discha...

Questions in other subjects:

Konu
English, 18.02.2022 01:00