Engineering, 18.09.2019 00:20 Chantamariepaul

Rigid bar abc is supported by a pin at bracket a and by tie rod (1). tie rod (1) has a diameter of 7 mm, and it is supported by double-shear pin connections at b and d. the pin at bracket a is a single-shear connection. the pin at b is 8 mm in diameter. assume a = 540 mm, b = 270 mm, h = 340 mm, and θ= 55°. if the normal stress in tie rod (1) cannot exceed 180 mpa and the shear stress in pin b cannot exceed 130 mpa, determine the maximum load pmax that can be supported by the structure.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, xboxdude06

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

continue

Engineering, 04.07.2019 18:10, katelynn73

Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1

Answers: 1

continue

Engineering, 04.07.2019 18:20, ashleyjaslin

Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.

Answers: 3

continue

Engineering, 04.07.2019 19:10, jennymares

Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m

Answers: 1

continue

You know the right answer?

Rigid bar abc is supported by a pin at bracket a and by tie rod (1). tie rod (1) has a diameter of 7...