subject
Engineering, 14.09.2019 05:30 treseanthegreat

Air is compressed at 100 kpa and 300 k up to 300 kpa in the first stage of a double stage compressor. at the exit of this first stage the air enters a refrigerator where it cools down to 300 k before entering the second stage of the compressor from which it leaves at 1000 kpa. it considers steady state and that the compression processes are isoentropic. determine: 1. output temperature of the second stage of the compressor (k) and work spent on each stage of the compressor per unit mass (kj / kg). 2. if the compression had been carried out in a single stage, how much greater would have been the work spent by the compressor? (%)3. heat transferred in the refrigerator per unit of mass (kj / kg) and variation of entropy in the refrigerator (j / kg · k). 4. refrigerator pressure value (kpa) corresponding to the minimum work spent by the compressor. 5. find an expression for the total work spent by the compressor per unit mass (kj / kg) based on the refrigerator pressure (assuming the conditions of the compressor's inlet and outlet pressure are known, and with an outlet temperature of refrigerator equal to the compressor inlet). 6. draw all the air states on the p-v and t-s diagrams.

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, viicborella
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
image
Engineering, 04.07.2019 18:10, Strick1530
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
image
Engineering, 04.07.2019 18:20, CelesteN64
Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options
Answers: 2
image
Engineering, 04.07.2019 19:20, mariahmimibrooks
Liquid flows at steady state at a rate of 2 lb/'s through a pump, which operates to raise the elevation of the liquid 100 ft from control volume inlet to exit. the liquid specific enthalpy at the inlet is 40.09 btu/lb and at the exit is 40.94 btub. the pump requires 3 btu/s of power to operate. if kinetic energy effects are negligible and gravitational acceleration is 32.174 tt/s, the heat transfer rate associated with this steady state process is most closely 1)-2,02 btu/s from the liquid to the surroundings 2)-3.98 btu/s from the surroundings to the liquid. 3)-4.96 btu/s from the surroundings to the liquid. 4)-1.04 btu/s from the liquid to the surroundings.
Answers: 2
You know the right answer?
Air is compressed at 100 kpa and 300 k up to 300 kpa in the first stage of a double stage compressor...

Questions in other subjects: