Engineering, 14.09.2019 04:30 spiderman66
In a turning operation on stainless steel with hardness = 200 hb, the cutting speed = 200 m/min, feed = 0.25 mm/rev, and depth of cut = 7.5 mm. how much power will the lathe draw in performing this operation if its mechanical efficiency = 90%. use standard tables to obtain the appropriate specific energy value.
Answers: 1
Engineering, 04.07.2019 18:10, soreese02
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 18:20, esmemaluma00
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
In a turning operation on stainless steel with hardness = 200 hb, the cutting speed = 200 m/min, fee...
Mathematics, 12.10.2020 21:01
Mathematics, 12.10.2020 21:01