Engineering, 14.09.2019 03:30 emilygoolsby2123

An experiment was set-up to measure an unknown fluid's viscosity. two flat plates are separated by a gap of 4.5 mm and move relative to each other at a velocity of 5 m/s. the space between them is occupied by the unknown viscosity. the motion of the plates is resisted by a shear stress of 10 pa due to the viscosity of the fluid. assuming that the velocity gradient of the fluid is constant, determine the coefficient of viscosity of the fluid.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, Talos02

Burgers vector is generally parallel to the dislocation line. a)-true b)-false

Answers: 2

continue

Engineering, 04.07.2019 18:20, kodyclancy

Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero

Answers: 2

continue

Engineering, 04.07.2019 19:10, moneyyfletcher

The air in an automobile tire with a volume of 0.015 m3 is at 32°c and 140 kpa gage. determine the amount of air that must be added to raise the pressure to the recommended value of 206 kpa gage. assume the atmospheric pressure to be 128 kpa and the temperature and the volume to remain constant.[r-0.287 kj/kgk]

Answers: 3

continue

Engineering, 06.07.2019 02:30, cofran

A75mm diameter shaft is supported in a journal bearing 75mm long with a diametral clearance of 0. 1mm. it supports a radial load of 1000 n and is lubricated with sae 50 oil at 70°c. find the friction torque and the power loss when the crankshaft rotates at 2900 rev/min.

Answers: 1

continue

You know the right answer?

An experiment was set-up to measure an unknown fluid's viscosity. two flat plates are separated by a...