Engineering, 14.09.2019 00:30 Destinyb9806
Ametallic material with yield stress of 140 mpa and cross section of 300 mm x 100 mm, is subjected to a tensile force of 8.00 mn. will the sample experience plastic deformation? you must justify your answer.
Answers: 2
Engineering, 04.07.2019 18:10, yasminothman02
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:20, hayleymckee
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Ametallic material with yield stress of 140 mpa and cross section of 300 mm x 100 mm, is subjected t...
Health, 20.09.2020 03:01
Biology, 20.09.2020 03:01
Chemistry, 20.09.2020 03:01
Mathematics, 20.09.2020 03:01
Chemistry, 20.09.2020 03:01