Engineering, 14.09.2019 00:20 itasykamila

Design a single cyclone (swift conventional) to handle 20,000cfm
(at 250f and 1atm) of air contaminated with the particles :
particulate density =1200 kg/m^3 gas density = .90 kg/m^3
gas viscosity =.06 kg/m-hr and inlet gas velocity 25m/s
size range: 0-4, 4-10, 10-20, 20-40, 40-80, > 80
mass percent 3.0, 10.0, 30.0, 40.0, 15.0, 2.0
the required efficiency must be between 75% and 80% and the maximum
allowable pressure drop is 8.0 in. h2o.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, alyssabailey7545

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

Answers: 1

continue

Engineering, 04.07.2019 18:10, winterblanco

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

continue

Engineering, 04.07.2019 18:20, kendrawalraven

The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?

Answers: 3

continue

Engineering, 04.07.2019 18:20, rbgrh9465

An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.

Answers: 3

continue

You know the right answer?

Design a single cyclone (swift conventional) to handle 20,000cfm
(at 250f and 1atm) of air con...