Engineering, 13.09.2019 23:30 swaggg2084

The 30 degree vertical bend in a pipe with a 2 ft diameter
carries water (rho = 62.4 lbm/ft^3) at a rate of 31.4 cfs. if the
pressure p1 is 10 psi at the lower end of the bend, where the
elevation is 100 ft, and p2 is 8.5 psi at the upper end, where the
elevation is 103 ft, what will be the vertical component of force
that must be exerted by the "anchor" on the bend to hold it in
position? the bend itself weighs 300 lb, and the length l is 4
ft.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, ashleybaber4966

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Answers: 1

continue

Engineering, 04.07.2019 18:10, settasav9641

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

continue

Engineering, 04.07.2019 18:10, tjeffers90028

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

continue

Engineering, 04.07.2019 18:10, tobyhollingsworth178

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

continue

You know the right answer?

The 30 degree vertical bend in a pipe with a 2 ft diameter
carries water (rho = 62.4 lbm/ft^3)...