Engineering, 13.09.2019 23:30 aariannahnorwoo

Acylindrical rod of copper originally 16.0 mm id diameter is to be cold worked by drawing; the circular cross section will be maintained during deformation. a cold-worked yield strength in excess of 250 mpa and a ductility of at least 12%el are desired. furthermore, the final diameter must be 11.3 mm. using the graphs below, explain how this can be accomplished.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, cowgyrlup124

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

continue

Engineering, 04.07.2019 12:10, Ryantimes2

On a average work day more than work place firs are reorted

Answers: 1

continue

Engineering, 04.07.2019 18:10, hadellolo8839

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, anna22684

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Answers: 2

continue

You know the right answer?

Acylindrical rod of copper originally 16.0 mm id diameter is to be cold worked by drawing; the circ...