subject
Engineering, 13.09.2019 22:30 davidb1113

Fermentation of starch and sugar crops yields 5% to 20% molar volume of ethanol in water, which is too wet to burn. distillation of this mixture to remove water produces a mixture of 95% ethanol and 5% water, the azeotrope of the mixture, which is called hydrous ethanol. detydration to anhydrous ethanol, which is 99.7% pure ethanol and is the standard for blending with gasoline in the u. s., requires additional processing and costs. in brazil most vehicles are flex fuel vehicles of a different design that flex fuel vehicles in the u. s., in that they can burn straight hydrous ethanol (no gasoline) as well as any mixtures of gasoline and hydrous ethanol 1a) calculate the enthalpy change when oxidizing (burning) pure ethanol in air if the initial temperature is at 25c and the exhaust temperatures is 6ook. 1b) recalculate the enthalpy change for a hydrous ethanol mixture of 95% ethanol and 5% water. assume the 95: 5 mixture of ethanol and water is on a mass basis.

ansver
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, meganwintergirl
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
image
Engineering, 04.07.2019 18:10, keigleyhannah30
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
image
Engineering, 04.07.2019 18:10, aaliyah80
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
image
Engineering, 04.07.2019 18:10, chadatkin
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
You know the right answer?
Fermentation of starch and sugar crops yields 5% to 20% molar volume of ethanol in water, which is t...

Questions in other subjects:

Konu
Mathematics, 30.01.2021 22:30
Konu
Mathematics, 30.01.2021 22:30