Engineering, 13.09.2019 21:10 mastsa

An aggregate blend is composed of 53% coarse aggregate by weight
(sp. gr. 2.702), 43% fine aggregate (sp. gr. 2.621), and 4% filler
(sp. gr. 2.779)/ the compacted specimen contains 6% asphalt binder
(sp. gr. 1.052) by weight of total mix, and has a bulk density of
145.2 lb/ft3. ignoring
absorption, computer the percent voids in total mix, percent voids
in mineral aggregate, and the percent voids filled with asphalt.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, kayabwaller4589

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

continue

Engineering, 04.07.2019 18:10, jadeochoa4466

The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false

Answers: 2

continue

Engineering, 04.07.2019 18:10, lowkeyqueenk

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

continue

Engineering, 04.07.2019 18:10, redrosesxx

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux

Answers: 3

continue

You know the right answer?

An aggregate blend is composed of 53% coarse aggregate by weight
(sp. gr. 2.702), 43% fine agg...