Engineering, 13.09.2019 16:30 kami23arap5p78v

Atimber beam consists of three 50 x 200 mm planks fastenedtogether
to form an i-beam 200 mm wide x 300 mm deep. if theflexural stress
of point a of the cross section is 7.5 mpa (intension),
determine:
a) the flexural stress at point b of the cross section.
b) the flexural stress at point c of the cross section.
c) the flexural stress at point d of the cross section.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, kayabwaller4589

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

continue

Engineering, 04.07.2019 16:10, TheOriginalMeyah

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Answers: 2

continue

Engineering, 04.07.2019 19:10, jennymares

Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m

Answers: 1

continue

Engineering, 04.07.2019 19:10, netflixacc0107

What is the major difference between thermoplastics and thermosetting plastics from the polymerization structure point of view?

Answers: 2

continue

You know the right answer?

Atimber beam consists of three 50 x 200 mm planks fastenedtogether
to form an i-beam 200 mm wi...