subject
Engineering, 13.09.2019 16:30 mattdallas6214

Suppose you require 4 m3/s of water with a salt content of 0.1 g/l for irrigation purposes. you have two reservoirs from which you can withdraw water. reservoir a has a salt concentration of 500 ppm and reservoir b has a salt concentration of 50 ppm. what flow rate should be pumped from each reservoir to meet the objective?

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, DestyHilBan1183
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
image
Engineering, 04.07.2019 19:20, nikkiebartels
Afan that can provide air speeds up to 60 m/s is to be used in a low-speed wind tunnel with atmospheric air at 35 c. if one wishes to use the wind tunnel to study flat-plate boundary layer behavior up to reynolds numbes of re 10, what is the minimum plate length that should be used? at what distance from the leading edge would transition occur if the critical reynolds nurnber were rer, e = 5 × 105?
Answers: 2
image
Engineering, 06.07.2019 03:10, DeathFightervx
Air is flows through an adiabatic nozzle with an inlet pressure of 400 psia at a temperature of 300°f and a velocity of 20 ft/s. the outlet pressure is 40 psia and the velocity is 800 ftl/s. determine the outlet temperature of the air using: a) property tables b) specific heat (using the specific heat value for air at 300°f)
Answers: 3
image
Engineering, 06.07.2019 03:20, cherkaouinazihp387bk
Figure out the odd statement about ceramics in the following (a) good insulators of heat and electricity (b) usually less desire than metals (c) ductile in nature (d) contains both metallic and nonmetallic elements
Answers: 3
You know the right answer?
Suppose you require 4 m3/s of water with a salt content of 0.1 g/l for irrigation purposes. you have...

Questions in other subjects:

Konu
Chemistry, 06.05.2020 19:16
Konu
Mathematics, 06.05.2020 19:17
Konu
Mathematics, 06.05.2020 19:17