Athin film of oil (v=0.001 m^2/s) 2mmthick flows down to
a surface inclined at 30 degrees to t...
Engineering, 13.09.2019 16:20 sparky1234
Athin film of oil (v=0.001 m^2/s) 2mmthick flows down to
a surface inclined at 30 degrees to thehorizontal. what is the
maximum and mean velocity offlow?
Answers: 3
Other questions on the subject: Engineering
Engineering, 04.07.2019 19:10, moneyyfletcher
The air in an automobile tire with a volume of 0.015 m3 is at 32°c and 140 kpa gage. determine the amount of air that must be added to raise the pressure to the recommended value of 206 kpa gage. assume the atmospheric pressure to be 128 kpa and the temperature and the volume to remain constant.[r-0.287 kj/kgk]
Answers: 3
Engineering, 04.07.2019 19:20, mariahmimibrooks
Liquid flows at steady state at a rate of 2 lb/'s through a pump, which operates to raise the elevation of the liquid 100 ft from control volume inlet to exit. the liquid specific enthalpy at the inlet is 40.09 btu/lb and at the exit is 40.94 btub. the pump requires 3 btu/s of power to operate. if kinetic energy effects are negligible and gravitational acceleration is 32.174 tt/s, the heat transfer rate associated with this steady state process is most closely 1)-2,02 btu/s from the liquid to the surroundings 2)-3.98 btu/s from the surroundings to the liquid. 3)-4.96 btu/s from the surroundings to the liquid. 4)-1.04 btu/s from the liquid to the surroundings.
Answers: 2
You know the right answer?
Questions in other subjects:
History, 17.05.2021 16:30
Mathematics, 17.05.2021 16:30
