Engineering, 12.09.2019 04:30 shadowblade8203

Arefrigeration plant operates in pretoria on refrigerant r134a at an evaporator pressure of 105kpa (gauge) and a condensing pressure of 920 kpa (gauge). there is a sub-cooling of 3k with a superheat of the gas entering the compressor of 8k. the compressor is a four-cylinder reciprocating compressor with a bore of 67mm and a stroke of 57mm with an estimated capacity of 35kw. the compressor is directly coupled to an electric motor running at 1470rev/min and a power consumption of 19,5 kw. calculate: 1. the clearance volume efficiency if the compressor clearance is 3,6% 2. the actual volumetric efficiency 3. the compression efficiency when the mechanical efficiency is 85% and the motor efficiency 90%.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, abdirahmansoloman

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

continue

Engineering, 04.07.2019 18:10, redrosesxx

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux

Answers: 3

continue

Engineering, 04.07.2019 18:10, xboxdude06

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

continue

Engineering, 04.07.2019 18:10, colin774

The higher the astm grain size number, the finer the gran is. a)-true b)-false

Answers: 2

continue

You know the right answer?

Arefrigeration plant operates in pretoria on refrigerant r134a at an evaporator pressure of 105kpa (...