Consider the double shear lap joint, which is glued to a clevis. compute the shearing stress in the adhesive, if the width of the splice is 4 inches. 3b) what is the shearing stress in the bolts, if there are two bolts equally loaded in the joint. the bolt diameters are 1/2". 3c) what is the bearing stress on the splice plate? 0.5" 250 [lb]

What precautions should you take to prevent injuries when dealing with heavy loads?

Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.

For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor