subject
Engineering, 02.09.2019 20:10 tanya44737

Ametal pipe with an outside diameter (od) of 12cm is covered with an insulation material [k-0.07w/m.°c] of 2.5cm thick. if the outer pipe wall is at 100°c and the outer surface of the insulation is at 20°c, find the heat loss from the pipe per meter length

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, michellerosas
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
image
Engineering, 04.07.2019 18:10, xboxdude06
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
image
Engineering, 04.07.2019 18:20, moneywaydaedae
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
image
Engineering, 06.07.2019 03:20, Giabear23
Major ingredients of traditional ceramics (a) silica (b) clay (c) feldspar (d) all
Answers: 1
You know the right answer?
Ametal pipe with an outside diameter (od) of 12cm is covered with an insulation material [k-0.07w/m....

Questions in other subjects:

Konu
Social Studies, 17.07.2019 06:30