Engineering, 30.08.2019 23:30 drastipatel18

You have a piece of steel with dimensions of 100 x 100 x 10 mm thick and you want to machine in a milling machine which has three end mill type tools with 4 lips, and 3, 12 and 20 mm diameter respectively. if you plan to machine with 4500 revolutions per minute and according to the characteristics of the material and the type of the tool it is recommended to have a feed per revolution of 0.0555 mm., calculate for each tool the following: a)- the cutting speed of the tool. b)- the advance of the tool. c)- the advance per tooth.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 03.07.2019 15:10, margaret1758

If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.

Answers: 1

continue

Engineering, 04.07.2019 16:10, Arealbot

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

continue

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

You know the right answer?

You have a piece of steel with dimensions of 100 x 100 x 10 mm thick and you want to machine in a mi...