Engineering, 30.08.2019 00:20 Geo777

Agenerator is to be driven by a small pelton wheel with a head of 91.5m at inlet to the nozzle and discharge of 0.04m^3/s. the wheel rotates at 720rpm a n d the velocity coefficient of the nnozzle is 0.98. if the efficiency of the wheel (based on the energy available at entry to the nozzle) is 80 per cent and the ratio of bucket speed to jet speed is0.46, determine the wheel-to-.jet-di meter ratio at the centre-line of the buckets, and the speed of the wheel. what is the dimensionless power specific speed of the wheel?

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, niicoleassssssf

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Answers: 2

continue

Engineering, 04.07.2019 18:10, wirchakethan23

Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i. d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.

Answers: 3

continue

Engineering, 04.07.2019 18:20, safiyabrowne7594

Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?

Answers: 3

continue

Engineering, 04.07.2019 19:10, kimmy6973

What is creep? what is stress relaxation?

Answers: 1

continue

You know the right answer?

Agenerator is to be driven by a small pelton wheel with a head of 91.5m at inlet to the nozzle and d...