subject
Engineering, 29.08.2019 16:30 niti1409

Asingle-stage centrifugal pump is to be used to pump water through a vertical distance of 30m at the rate of 45litres/s. suction and delivery pipes will have a combined length of 36m and a friction factor of 0.006. both will be 150mm diameter. losses at the valve, etc are estimated to total 2.4 times the velocity head in the pipe. the basic design of the pump has a dimensionless specific speed of 0.074 revs, forward curved impeller blades with an outlet angle equal to one-tenth of the diameter. the blades themselves occupy 5% of the circumference. if a manometric efficiency (neglect whirl slip)of 75% may be expected, determine a suitable impeller diameter.

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, aliceohern
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
image
Engineering, 03.07.2019 15:10, margaret1758
If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.
Answers: 1
image
Engineering, 04.07.2019 16:10, TheOriginalMeyah
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
image
Engineering, 04.07.2019 18:10, skpdancer1605
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
You know the right answer?
Asingle-stage centrifugal pump is to be used to pump water through a vertical distance of 30m at the...

Questions in other subjects: