Engineering, 23.08.2019 03:20 chjam265

Acylindrical rod of 1040 steel originally 11.4 mm in diameter is to be cold worked by drawing; the circular cross section will be maintained during deformation. a cold- worked tensile strength in excess of 825 mpa and a ductility of at least 12%el are desired. furthermore, the final diameter must be 8.9 mm. explain how this can be accomplished?

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 04.07.2019 18:10, namira16

Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.

Answers: 2

continue

Engineering, 04.07.2019 19:20, ijohnh14

Apure substance is a)-mixture of various chemical elements or compounds b)-substance that has a fixed chemical composition throughout c)-mixture that is homogeneous (such as air) d)-all the answers

Answers: 3

continue

Engineering, 04.07.2019 19:20, zoebtharpe

Heat transfer by is the fastest mode of heat transfer that requires no intervening medium. a)-conduction b)-convection c)-radiation d)-conduction and convection

Answers: 1

continue

You know the right answer?

Acylindrical rod of 1040 steel originally 11.4 mm in diameter is to be cold worked by drawing; the...