Engineering, 22.08.2019 18:30 jaliyahrobinson1

48.two 5-cm-diameter, 15-cm-long aluminum bars (k=176w/m°c) with ground surfaces are pressed against each other with a pressure of 20 atm. the bars are enclosed in an insulation sleeve and, thus, heat transfer from the lateral surfaces is negligible. if the top and bottom surfaces of the two-bar system are maintained at temperatures of 150°c and 20°c, respectively. determine: a) the rate of heat transfer along the cylinders under steady conditions; b) the temperature drop at the interface

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, keigleyhannah30

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

continue

Engineering, 04.07.2019 18:10, tobyhollingsworth178

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

continue

Engineering, 04.07.2019 19:10, nhester3401

Agas is compressed from vi 0.3 m, p 1 bar to of v2 0.1 m3, p2--3 bar. pressure and volume are related linearly during the process. for the gas, find the work, in kj.

Answers: 2

continue

Engineering, 06.07.2019 04:10, kraigstlistt

Agas mixture with a compostion of 55 methane, 30% propane, and 15 butane by volume) is compressed from 1 bar and 25°c to 9bar in a compressor with an isentropic efficiency of 85%. the environment has a temperature of to25 c. determine (a) the exit temperature of the mixture (b) the specific work required to run the compressor (c) the specific entropy generation of the process (d) the specific exergy destruction of the process (e) the second law efficiency of the compressor

Answers: 3

continue

You know the right answer?

48.two 5-cm-diameter, 15-cm-long aluminum bars (k=176w/m°c) with ground surfaces are pressed against...