Engineering, 22.08.2019 16:30 MK100

A2 mx 1.5 m section of wall of a furnace is not insulated and the temperature at the outer surface of this section is measured to be 110 °c. the temperature of the furnace room is 32 °c. it is proposed to insulate this section with glass wool insulation (k = 0.038 w/m. k) in order to reduce the heat loss by 90 percent. determine the thickness of the insulation using the total thermal resistance, assuming the outer surface temperature of the metal section still remains at 110 °c, the effective convection heat transfer coefficient at the surface of the outer furnace is h = 10 w/m²k and disregarding any radiation.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, niyawilliams23

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

continue

Engineering, 04.07.2019 18:10, ayoismeisjjjjuan

Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges

Answers: 1

continue

Engineering, 04.07.2019 18:10, tobyhollingsworth178

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

continue

Engineering, 04.07.2019 18:20, CelesteN64

Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options

Answers: 2

continue

You know the right answer?

A2 mx 1.5 m section of wall of a furnace is not insulated and the temperature at the outer surface o...