subject
Engineering, 22.08.2019 05:20 notsobright10

Air enters a dehumidifier/air-conditioning system with a mass flow rate of 60 kg dry air/min. the entering air is at 26°c, 50% relative humidity. saturated air and condensate leave the cooling section at 4°c. the air is then heated to a final temperature of 20°c in the heating section. determine: a.) the rate heat is removed in the cooling section, kj/min and tons b.) the rate water is condensed in the cooling section c.) the rate of heat transfer to the air in the heater section, kw d.) the relative humidity of the air exiting the system

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, bckyanne3
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
image
Engineering, 04.07.2019 18:10, leomessifanboy678
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
image
Engineering, 04.07.2019 18:10, ayoismeisjjjjuan
Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges
Answers: 1
image
Engineering, 04.07.2019 18:20, mjcbs21
What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.
Answers: 3
You know the right answer?
Air enters a dehumidifier/air-conditioning system with a mass flow rate of 60 kg dry air/min. the en...

Questions in other subjects:

Konu
History, 20.05.2021 22:10
Konu
Business, 20.05.2021 22:10