An axial flow compressor of50 percent reaction design has blades with inlet and outlet angles at 45oand 10orespectively. the compressor is to produce a pressure ratio of 6: 1 with overall isentropic efficiency of 0.85when inlet static temperature is 37°c. the blade speed and axial velocity are constant throughout the compressor. assuming a value of 200 m/s for blade speed. find the number of stages required if the work done factor is (a) unity and (b) 0.87.

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2