Engineering, 22.08.2019 00:30 avagracesmith5

Air enters an adiabatic turbine at 2.8 mpa and 400 °c and expands to a lower pressure of 150 kpa. assume an isentropic efficiency of 90% for the turbine. (a) assume air to be an ideal gas with constant specific heats at the anticipated average temperature of 400 k. why is it safe to do so? (6) solve for the actual work per unit of mass produced by the turbine. (c) determine the actual outlet temperature of the turbine. (d) draw the t-s diagram for the air passing through the turbine (show the actual and isentropic processes). (e) how much entropy will be generated per unit of mass while the turbine is running?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, brooklyn674

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

continue

Engineering, 04.07.2019 18:10, heidiburgos1own6c0

Fluids at rest possess no flow energy. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, bckyanne3

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

continue

Engineering, 04.07.2019 18:10, xboxdude06

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

continue

You know the right answer?

Air enters an adiabatic turbine at 2.8 mpa and 400 °c and expands to a lower pressure of 150 kpa. as...