Engineering, 21.08.2019 04:30 SKYBLUE1015
Acooling coil with a cross sectional area of 20 ft is employed to cool from 95 f dh75 f wb to s8.0 f dry-bulb temperature with chilled water entering the coil at 42 f. face velocity should not exceed 500 fpm. assume water velocity to be 6 f's and water temperature rise wtr st. determine (o) the volume flow rate (b) the number of rows (c) the number of fins per foot (d) the rate of heat transfer in the coil in tons and (e) the rate of latent heat transfer in the coil in tons
Answers: 2
Engineering, 04.07.2019 18:10, lowkeyqueenk
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 18:10, Tyrant4life
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
Engineering, 04.07.2019 18:10, wyattlb97
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Acooling coil with a cross sectional area of 20 ft is employed to cool from 95 f dh75 f wb to s8.0 f...
Geography, 23.08.2019 17:30
Computers and Technology, 23.08.2019 17:30
Mathematics, 23.08.2019 17:30