Engineering, 21.08.2019 02:30 jenstets05

It is desired to produce and aligned carbon fiber-epoxy matrix composite having a longitudinal tensile strength of 72,500 psi. calculate the volume fraction of fibers necessary if (a) the average fiber diameter and length are .01 and.05 mm respectively (b) the fiber fracture strength is 580,000 psi. (c) the fiber matrix bond strength is 3625 psi and the matrix stress at composite failure is 1,000 psi.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, tjeffers90028

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

continue

Engineering, 04.07.2019 19:10, lexie223

Acircular aluminum shaft mounted in a journal is shown. the symmetric clearance gap between the shaft and journal is filled with sae 10w-30 oil at t 30°c. the shaft is caused to turn by the attached mass and cord. develop and solve a differential equation for the angular speed of the shaft as a function of time.

Answers: 2

continue

Engineering, 04.07.2019 19:20, horsedoggal1234

Consider airflow over a flat plate of length l = 1.5 m under conditions for which transition occurs at le = 0.9 m based on the critical reynolds number, re, e = 5 x 10. evaluating the thermophysical properties of air at 400 k, determine the air velocity. (hint: use the tables to find the properties of air)

Answers: 3

continue

Engineering, 06.07.2019 04:30, christinachavez081

Acylindrical tank is capable of storing 20,000 foot-pounds [ft ibf] of energy for use in your roommate's 2006 subaru wrx. the tank contains nitrous oxide, n20, which you may assume is an ideal gas and has a molecular weight of 44 grams per mole 1g/mol. the tank fits in a space in the trunk that is no wider than 6 inches fin] and no longer than 10 inches [inj, and you may assume the warm clemson weather is keeping the temperature of the tank inside the trunk at a constant 100 degrees fahrenheit [°fl. what is the weight of the nitrous oxide occupying the tank when full, in units of dynes

Answers: 1

continue

You know the right answer?

It is desired to produce and aligned carbon fiber-epoxy matrix composite having a longitudinal tensi...