Engineering, 20.08.2019 21:30 Bloom247

When building a cnc fixture for a part; what is the easiest way to make sure the cutter will not be damaged while machining the profile of the part? (a)-go back to the cad model often to double check the geometry of the part (b)-dry run the program many times to ensure it is dear of all locators and clamps. (c) perform many calculations in the program to make sure all locators are dear of the tool path. (d) use the program itself to cut a clearance channel for the cutter and then install locators

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, cowgyrlup124

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

continue

Engineering, 03.07.2019 15:10, margaret1758

If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.

Answers: 1

continue

Engineering, 03.07.2019 23:20, abbz13

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Answers: 3

continue

Engineering, 04.07.2019 18:10, winterblanco

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

continue

You know the right answer?

When building a cnc fixture for a part; what is the easiest way to make sure the cutter will not be...