Engineering, 20.08.2019 21:10 davestrider404

Room temperature air flows over a horizontal smooth flat plate at a freestream speed of u = 20 m/s. the plate length is l = 1.5 m and its width is b = 0.8 m. the boundary layer is tripped at its leading edge so that it is turbulent over its entire length. using results based on the 1/7th power velocity profile, evaluate the boundary layer thickness δ at the trailing edge of the plate. calculate the wall shear stress at the trailing edge of the plate. estimate the drag (due to friction) on the portion of the plate between x = 1.0 m and the trailing edge and compare this with the drag over the first 0.5 m of the plate.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, bryneosburn

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

Answers: 2

continue

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

Engineering, 04.07.2019 18:10, alyssabailey7545

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

Answers: 1

continue

Engineering, 04.07.2019 18:10, xboxdude06

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

continue

You know the right answer?

Room temperature air flows over a horizontal smooth flat plate at a freestream speed of u = 20 m/s....