subject
Engineering, 20.08.2019 18:30 jasminer257

A1.80 m wide and 5.0 m long plate moves through a stationary air of density 1.22 kg/m3 and viscosity 1.8x 104 poise at a velocity of 1.75 m/s parallel to its length. determine the drag force on one side of the plate by assuming (i) laminar flow (ii) turbulent flow

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, settasav9641
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
image
Engineering, 04.07.2019 18:10, leomessifanboy678
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
image
Engineering, 04.07.2019 18:10, xboxdude06
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
image
Engineering, 04.07.2019 18:10, samanthabutryn
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
You know the right answer?
A1.80 m wide and 5.0 m long plate moves through a stationary air of density 1.22 kg/m3 and viscosity...

Questions in other subjects:

Konu
Social Studies, 14.04.2021 20:50