subject
Engineering, 20.08.2019 18:30 Jowell3858

Determine the heat exchange per m² of area a, in the following cases if a, is at 1000 k and a, is at 400 k, both surfaces being black. (i) perpendicular planes 2 mx 1 m size with 2 m being the common edge (ii) perpendicular planes of 2 mx 1 with 1 m being the common edge. (ii) equal coaxial parallel disks of 1 m dia, placed 1 m apart (iii) same as in (iv) but placed 0.5 m apart. (v) concentric circular disks of 1 m dia and 0.5 m dia placed 0.5 m apart with the smaller one as surface a1

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, aaliyah80
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
image
Engineering, 04.07.2019 18:10, michellerosas
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
image
Engineering, 04.07.2019 18:10, agpraga23ovv65c
Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.
Answers: 2
image
Engineering, 04.07.2019 18:10, krystabrewer3
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
You know the right answer?
Determine the heat exchange per m² of area a, in the following cases if a, is at 1000 k and a, is at...

Questions in other subjects:

Konu
Computers and Technology, 08.01.2021 18:40