Engineering, 20.08.2019 17:20 gabrielleteti
Determine the required number of active coils and permissable deflection in a helical spring made of 1.6 mm diameter steel wire, assuming a spring index of 6 and allowable stress of 345 mpa in shear. the spring rate is to be 1.75 n/mm.
Answers: 3
Engineering, 04.07.2019 18:10, alyssabailey7545
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
Engineering, 04.07.2019 18:10, QueenLife4869
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Engineering, 04.07.2019 18:20, cristykianpour
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
Engineering, 04.07.2019 18:20, 21megoplin
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
Determine the required number of active coils and permissable deflection in a helical spring made of...
Mathematics, 14.12.2019 01:31
Health, 14.12.2019 01:31
Arts, 14.12.2019 01:31
Mathematics, 14.12.2019 01:31
History, 14.12.2019 01:31
English, 14.12.2019 01:31