Engineering, 20.08.2019 17:10 indiareed0orv5ul

For an outdoor air temperature of 20°f, 45,000 btu/hr is required to maintain the temperature in a house at 72°f. a heat pump using r-22 as the refrigerant is used to supply this heat. the r-22 leaves the evaporator at p = 45 psi, t - 12°f and the condenser operates at a pressure of 250 psi. assuming an isentropic compressor efficiency of 82%, determine: a) the refrigerant flow rate, b) the compressor power input, and c) the coefficient of performance

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, cowgyrlup124

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

continue

Engineering, 04.07.2019 18:10, mamasbug4285

An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0

Answers: 3

continue

Engineering, 04.07.2019 19:10, Mimidj9279

The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false

Answers: 2

continue

Engineering, 04.07.2019 19:20, nikkiebartels

Afan that can provide air speeds up to 60 m/s is to be used in a low-speed wind tunnel with atmospheric air at 35 c. if one wishes to use the wind tunnel to study flat-plate boundary layer behavior up to reynolds numbes of re 10, what is the minimum plate length that should be used? at what distance from the leading edge would transition occur if the critical reynolds nurnber were rer, e = 5 × 105?

Answers: 2

continue

You know the right answer?

For an outdoor air temperature of 20°f, 45,000 btu/hr is required to maintain the temperature in a h...