Engineering, 20.08.2019 17:10 murphyscott794
You drive a car on a winter day with the atmospheric air at -15°c, and you keep the outside front windscreen surface temperature at +2°c by blowing hot air on the inside surface. if the windscreen is 0.5m² and the outside convection coefficient is 250w/m²k, find the rate of energy loss through the front windscreen. for that heat transfer rate and a 5mm thick glass with k=1.25w/mk, what is the inside windscreen surface temperature?
Answers: 3
Other questions on the subject: Engineering
Engineering, 03.07.2019 15:10, EmilySerna
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 18:10, Candi9697
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
Engineering, 04.07.2019 18:10, QueenLife4869
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
You know the right answer?
You drive a car on a winter day with the atmospheric air at -15°c, and you keep the outside front wi...
Questions in other subjects:
Geography, 03.07.2020 14:01
Mathematics, 03.07.2020 14:01
