Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.128 kg/s, and it leaves at 0.7 mpa and 50°c. the refrigerant is cooled in the condenser to 24°c and 0.65 mpa, and it is throttled to 0.15 mpa. disregarding any heat transfer and pressure drops in the connecting lines between the components determine (a) the rate of heat removal from the refrigerated space and the power input to the compressor kw (round to one decimal place) kw (round to two decimal places) in (b) the isentropic efficiency of the compressor, % (round to one decimal place) and (c) the cop of the refrigerator cop round to two decimal places)

Tom is having a problem with his washing machine. he notices that the machine vibrates violently at a frequency of 1500 rpm due to an unknown rotating unbalance. the machine is mounted on 4 springs each having a stiffness of 10 kn/m. tom wishes to add an undamped vibration absorber attached by a spring under the machine the machine working frequency ranges between 800 rpm to 2000 rpm and its total mass while loaded is assumed to be 80 kg. a) what should be the mass of the absorber added to the machine so that the natural frequency falls outside the working range? b) after a first trial of an absorber using a mass of 35 kg, the amplitude of the oscillation was found to be 10 cm. what is the value of the rotating unbalance? c) using me-3.5 kg. m, find the optimal absorber (by minimizing its mass). what would be the amplitude of the oscillation of the absorber?