Engineering, 07.08.2019 19:10 benjamenburton1

Asingle cylinder and stroke cycle l. c. engine when tested, the following observations avaiable: area of indcator dagram - 3 sq. cm, length of indctor dagram- 4 cm, spring constant 10 bar/cm, speed of engine 400 rpm, brake drum diameter 120 cm, dead weight on brake-380 n, spring balance reading = 50 n, fuel consumption= 2.8 kg/hr., cv- 42000 kj/kg, cylinder diameter 16 cm, piston stroke 20 cm. find: () f. p., (i) mechanical efficiency, (ii) bsfc, and (iv) brake thermal efficiency.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, aliceohern

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Answers: 3

continue

Engineering, 04.07.2019 18:10, danksans7011

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

continue

Engineering, 04.07.2019 18:20, hayleymckee

Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent

Answers: 2

continue

Engineering, 04.07.2019 18:20, esmemaluma00

Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um

Answers: 2

continue

You know the right answer?

Asingle cylinder and stroke cycle l. c. engine when tested, the following observations avaiable: ar...