Engineering, 07.08.2019 18:20 bre644

Air enters the diffuser of a turbojet engine at 18 kpa, 216 k, with a volumetric flow rate of 230 m3/s and a velocity of 265 m/s. the compressor pressure ratio is 15, and its isentropic efficiency is 93%. air enters the turbine at 1360 k and the same pressure as at the exit of the compressor. the turbine isentropic efficiency is 95%, and the nozzle isentropic efficiency is 97%. the pressure at the nozzle exit is 18 kpa. on the basis of an air-standard analysis, calculate the thrust magnitude, in kn.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:20, jessie8022

Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.

Answers: 2

continue

Engineering, 04.07.2019 19:10, kimmy6973

What is creep? what is stress relaxation?

Answers: 1

continue

Engineering, 06.07.2019 02:30, sandy2597

Precipitation hardening can be achieved in many light alloys by a three-step heat treatment. what is carried out and what is the purpose at each step? why is such a treatment necessary based on the nucleation and growth theory of phase transformation. compare this treatment with tempering martensite for carbon steels (similarities and differences).

Answers: 1

continue

Engineering, 06.07.2019 03:30, relic7391

The load on a bolt consists of an axial pull of 10 kn together with a transverse shear force of 5 kn. the bolt material has a yield strength of syt syc 100 mpa. find the diameter of the bolt at factor of safety n-0.5, n 1 and n-2 using maximum shear stress theory

Answers: 3

continue

You know the right answer?

Air enters the diffuser of a turbojet engine at 18 kpa, 216 k, with a volumetric flow rate of 230 m3...