Engineering, 07.08.2019 18:10 Fangflora3

Asimple vapor-compression refrigeration system operates with r-22 as the working fluid between the pressures of 2 bar and 30 bar. the refrigerant leaves the evaporator at 00c, it exits the condenser with a quality of 10% and the compressor efficiency is 61%. the cooling load is 254 kw. a. b. c. d. e. plot all five points on the p-h diagram provided. determine the temperature exiting the compressor. determine the power input to the compressor, in kw. determine the rate of heat rejection from the condenser, in kw determine the cop of the system.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 12:10, Ryantimes2

On a average work day more than work place firs are reorted

Answers: 1

continue

Engineering, 04.07.2019 18:20, mjcbs21

What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.

Answers: 3

continue

Engineering, 04.07.2019 18:20, AnonymousLizard52303

A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.

Answers: 3

continue

Engineering, 04.07.2019 19:10, jrcspiderman2003

Asteel wire of 2 mm diameter is fixed between two points located 2 m apart. the tensile force in the wire is 250n, if its density of steel is given by 7830 kg/m3 the fundamental frequency of vibration hz? ?

Answers: 3

continue

You know the right answer?

Asimple vapor-compression refrigeration system operates with r-22 as the working fluid between the p...