Engineering, 07.08.2019 04:30 smartgirl2092
Anuclear reactor fuel tank consists of a metallic uranium cylinder 0.65" in diameter with an aluminium cladding of 1/20" thick. this fuel element is then placed axially in a cylindrical channel 1.73" in radius. what is the cross-sectional area in si units through which coolant can flow?
Answers: 1
Engineering, 03.07.2019 14:10, volleyballfun24
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10, settasav9641
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:20, miguel454545
Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.
Answers: 1
Anuclear reactor fuel tank consists of a metallic uranium cylinder 0.65" in diameter with an alumini...
Mathematics, 04.02.2020 09:53
Health, 04.02.2020 09:53
Physics, 04.02.2020 09:53
Business, 04.02.2020 09:53